Stainless steel extinguisher

 

chanpi1.jpg (102237 字节)

Special Marks:

Cylinder made by stainless steel

Better strength, not easily corrode, safety and reliability

Surface and wonderful

General Data:

Standard:GB4351-1997(equal:ISO/DIS7165:1995)

Propellant: Nitrogen

Use temperature(1211):-20℃~+55℃

Use temperature(BCF):5℃~+55℃

　

Particular areas of use:

Hotels
Plane, Car, Ship
Office buildings
Chemical factory, chemical depots
Cars and trucks
Food industry
Hospital industry

　

Type of extinguisher Extinguishing agent Amount of Extinguishing agent Discharge time Dimensions  (mm) W×H Total weight
MY0.5 1211(BCF) 0.5kg ≥6 sec. Φ66×240  1kg
MY1 1211(BCF) 1kg ≥6 sec. Φ85×280 1.7kg
MY2 1211(BCF) 2kg ≥8 sec. Φ102×408  3.1kg
MY4 1211(BCF) 4kg ≥9 sec. Φ120×510  6.1kg
MY6 1211(BCF) 6kg ≥9 sec. Φ160×530  9.2kg
MY9 1211(BCF) 9kg ≥12 sec. Φ160×650 13.6kg
MSQZ2 3% AFFF 2kg ≥15 sec. Φ102×408  3.1kg
MSQZ3 3% AFFF 3kg ≥20 sec. Φ120×470 5.1kg
MSQZ6 3% AFFF 6kg ≥30 sec. Φ160×530 10.5kg
MSQZ9 3% AFFF 9kg ≥40 sec. Φ160×650 14.5kg

　

SUSPENDED THERMOSTAT TYPE 1211FIRE EXTINGUISHER

(Stainless steel cylinder)
Type of extinguisher Amount of Extinguishing agent protected volume ( at 5% conc.)M3 Dimensions  (mm) D×H Total weight
MYZ4 4 10.7 234×250 7kg
MYZ6 6 16 272×270 8.8kg
MYZ8 8 21.3 298×290 12.6kg
MYZ12 12 32 342×310 18kg

　

Note: 

 1.The initial spray temperature is the initiation temperature of thethermosentive glass bubble. The initiation temperature is designed at 57℃ or 68℃ or 79℃ or 93℃, which could be selected in ordering according to  requirements.

 2.the protected volume shown above is typical for concentration of 5% by volume and will vary when higher or lower concentration is considered to be satisfactory.